Completing computer settings – Canon XEED WUX450 User Manual
Completing Computer Settings
When the operations are finished, click [Back to top] to return the initial
The name of the connected projector is displayed. (
Refreshes the displayed contents with the most recent information.
Turns projector power on or off.
Select an input signal and click [Apply] to change to that input
Select an aspect and click [Apply] to change to that aspect. (
Select an image mode and click [Apply] to change to that image
Switches the blank setting on or off. (
Switches the mute setting on or off. (
Select the setting for split-screen mode and click [Apply] to switch
to split-screen projection.
Split screen control
Select the control rights setting for split-screen mode and click
[Apply] to switch the side currently under control.
The control results and control error information are displayed at
the top of the screen.