Replacing the lamp – Canon XEED WUX450 User Manual
Page 201
201
Inst
all
a
tion an
d Ma
intena
nce
Ma
inten
ance
Replacing the Lamp
When the usage time of the lamp exceeds a certain amount of time, the following
message (two types) is displayed for 10 seconds every time the projector is turned
on.
2,700 hours to less than 3,000 hours
Prepare a new lamp when this screen is displayed.
• Only the [ ], [ ], OK and POWER buttons are available while this screen is
displayed.
• When you press the POWER button, the “Push POWER button again to turn off
power.” message appears.
• When this screen has disappeared after being displayed for 10 seconds, all
buttons become operable.
• This message will not be displayed again if you select [No] in response to the
message “Do you want to display this message again?”.
3,000 hours or more
If this screen is displayed, replace the lamp by referring to the procedure on
• Only the POWER button is available while this screen is displayed.
• When you press the POWER button, the “Push POWER button again to turn off
power.” message appears.
• When this screen has disappeared after being displayed for 10 seconds, all
buttons become operable.
• You can check the usage time of the lamp in [Lamp counter] in the [System
settings] menu. (
)
• This screen is not displayed when [Lamp warning display] is set to [Off]. (
)