Canon XEED WUX450 - Manual (Page 139)

Connection Procedure
139
Inst
alla
tio
n
an
d Main
te
nan
ce
Inst
allation
■ Connecting with an HDMI cable
(Input signal type: [HDMI] P53 )
■ Outputting Audio to Speakers
It is possible to output audio from the projected images to amplified speakers.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in
resistor will reduce the audio volume.
• The AUDIO IN terminal can be changed in the Audio in terminal select screen ( P153 ).
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in
resistor will reduce the audio volume.
Digital video output
terminal
(HDMI Terminal)
HDMI cable (not included)
To HDMI terminal
* When an HDMI cable is connected,
digital audio is also connected at the
same time.
Computer Projector
To AUDIO OUT terminal
Audio cable (not included)
RCA terminal
Mini jack
AUDIO IN terminal
(AUDIO IN)
Projector Speaker