Canon VB-M40 - Manual (Page 132)

7
-18
S306 Error on saving settings [err]
S307 Error on saving settings [err]
S310 Working error in event service [err]
S311 Working error in external input/output service [err]
S312 Working error in timer service [err]
S320 PAN/TILT operation error [err]
Description Can't update system settings (S306)
Meaning An error generated while the system was saving setting. Setting could not be saved.
Countermeasure Provide enough memory space by deleting unnecessary files in the user memory area, etc.
Description (vbadmin.c XXX) Can't update system settings (S307)
Meaning An error generated while the settings were saved by the setup protocol. Setting could not be saved.
Countermeasure Provide enough memory space by deleting unnecessary files in the user memory area, etc.
Description cannot work event [%1] [%2] [%3] (S310)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the event service was running.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description cannot work extio [%1] [%2] [%3] (S311)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An error occurred while the external input/output device service was running.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description cannot work timer [%1] [%2] [%3] (S312)
%1 Error number
%2 Cause of error
%3 Error information
Meaning An internal error occurred in the timer service.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
Description %1 error occurred. [%2] (S320)
1% PAN | TILT
2% Warning details
Meaning An error occurred during operation or stopping of PAN/TILT.
Countermeasure Check that the camera is not touching the dome, etc.
If the error is not caused by problems such as contact with peripheral items, the camera needs to be serviced.