Canon VB-M40 User Manual

Page 37

Advertising
background image

[Network] Administrator Password and LAN, IP Address, DNS and Other Settings

4

-7

4

S

et

ting Page

SNMP

1

[SNMP]
Set SNMP use to [Disable] or [Enable]. Camera

information can be referenced by the SNMP Manager if

[Enable] is specified.

2

[Community Name]
Set a community name for SNMP. It is recommended

that you change the community name to ensure system

security.

3

[Administrator Contact Information]
Set contact information (e-mail address, etc.) for the

Administrator of the camera. Setting information can be

referenced by the SNMP manager.

4

[Administration Function Name]
Set the camera name used for administration. Setting

information can be referenced by the SNMP manager.

If left blank, “VB-M40” will be used by default.

5

[Installation Location]
Set information regarding the installation location of this

camera. Setting information can be referenced by the

SNMP manager.

Note

• The information set in the camera is read-only from the SNMP

manager.

• Use the SNMP Manager that supports SNMP MIB2 (supporting

RFC1213).

• Supports SNMP protocol versions v1 and v2c (v3

unsupported).

Advertising