P. 4-18) – Canon VB-M40 User Manual

Page 48

Advertising
background image

4

-18

Image Server

1

[Maximum Number of Clients]
Set the maximum number of clients that can be

connected to the camera at the same time. Up to 30

clients can be set.

If 0 is set, connection is prohibited except for

Administrator.

2

[Camera Control Queue Length]

Set the maximum queue length for clients requesting

camera control privilege from the viewer. The maximum

number is 30. Enter an integer from 0 to 30. If 0 is set,

camera control is prohibited except for the

administrator.

3

[Maximum Connection Time (sec.)]
Set the time in seconds during which an individual

client can connect to the camera. The maximum

number is 65535. Enter an integer from 0 to 65535.

If 0 is set, the connection time becomes unlimited.

4

[Camera Control Time (sec.)]
Set the maximum time during which the viewer can

control the camera. The maximum number is 3600.

Enter an integer from 1 to 3600.

Audio Server

1

[Audio Transmission from the Camera]
When [Enable] is selected, the audio input through the

microphone attached to the camera can be transmitted

to the VB-M40 Viewer.

2

[Input Volume]

Set the volume of input for the microphone connected

to the camera in the range of 1 to 100. The greater the

value, the larger the input volume becomes.

3

[Voice Activity Detection]
If [Enable] is selected, the audio transmission is

stopped temporarily when no audio is output. This way,

the load of the applicable network can be reduced.

4

[Audio Reception from Viewer]
If [Enable] is selected, the audio received from the

bundled RM-Lite Viewer can be output from the

speaker with amplifier connected to the camera.

5

[Output Volume]

Set the volume of output for the speaker connected to

the camera in the range of 1 to 100. The greater the

value, the larger the output volume becomes.

6

[Echo Canceller]
If [Enable] is selected, echo between the microphone

and speaker is suppressed.

7

[Audio Input]
Set the microphone input. Select [Line In], [Microphone

In (dynamic microphone)] or[Microphone In

(condenser microphone)].

[Server]
Image Server, Audio Server and HTTP Server Settings

The following can be set here.

• Image Server

Set the image transmission from the camera.

• Audio Server

Set the audio transmission/reception.

• HTTP Server

Set the authentication method, HTTP port and

web page delivery.

Caution

Switch line in and microphone in on each setting page

according to the specification of the microphone
(P. 4-18).
Using the wrong input may damage the camera and/or
microphone. Be sure to configure settings correctly.

• Audio Transmission
• Input Volume
• Voice Activity Detection
• Echo Canceller

• Audio Reception
• Output Volume

Advertising