Canon VB-M40 - Manual (Page 77)

View Restriction Setting Tool
5
-13
5
A
d
min T
ool
s
Display Screens of View Restriction Setting Tool
1 Image Display Area
The image currently captured by the camera is shown.
Pan, tilt, and zoom operations are the same as in the
VB-M40 Viewer. For details, see “How to Operate the
Viewer” (P. 6-5).
2 [Switch Screen Size] button
Each time this button is clicked, the screen size of the
image display area switches between “320 x 240” and
“640 x 480.”
3 [Switch Mouse Operation] button
Click the button to switch to
. In this mode, move the
mouse pointer to the image display area and left-click
to operate the pan and tilt. Click the button again to
return to .
4 [Obtain/release Camera Control] button
This button is used to obtain/release the camera
control privileges. For details, see “Obtaining Camera
Control Privileges” (P. 6-6).
5 [Focus]
Focus can be operated if control privileges have been
obtained. Focus operations are the same as in the Admin
Viewer. For details, see “Setting the Focus” (P. 6-13).
6 [Smart Shade Control]
Smart shade control can be operated if control
privileges have been obtained. Smart shade control
operations are the same as in the Admin Viewer. For
details, see “Setting the Smart Shade Control”
(P. 6-12).
7 [Panorama Screen]
The panorama image registered in the camera is
shown. Also, a view restriction preview frame
representing the view restriction setting values is
shown, where you can drag the frame to change its
shape and reflect the new frame in the view restriction
settings.
• View restriction preview frame
7 -1 Pan/tilt preview frame (red frame)
Range of field of view defined by
top/ bottom/left/right edges
7 -2 Wide-angle preview frame (green frame)
Wide-angle restriction setting (restriction of
capture frame)
7 -3 Telephoto preview frame (yellow frame)
Telephoto restriction setting (restriction of
maximum zoom ratio)
8 [Digital Zoom]
The current digital zoom usage status of the camera is
shown in real time.
9 [Image Stabilizer]
The current image stabilizer usage status of the
camera is shown in real time.
A q [Apply the view restriction]
To use view restrictions, select this checkbox.
A a View restriction setting entry boxes and [Get value]
You can enter a value in each view restriction setting
entry box to change the applicable setting. You can
load the values for the current camera angle to the view
restriction settings by clicking [Get value].