Canon VB-M40 User Manual

Page 89

Advertising
background image

Intelligent Function Setting Tool

5

-25

5

A

d

min T

ool
s

7

[Display Options]
Select the [Detection Area] or [Detection Results] you

want to show in the image display area from the

following items.

• [Selected Detection Settings Only]

Show only the detection areas or detection results

for detection settings selected in the detection

setting list.

• [All Detection Settings]

Show the detection areas or detection results for all

detection settings in the detection setting list.

• [Detection Settings of the Same Type]

Show the detection areas or detection results for the

same type of detection settings as those selected in

the detection setting list.

• [Do not Display]

No detection areas or detection results are shown.

8

[Restart intelligent function]
If the background image has changed while you were

specifying settings or detection results are not as set,

etc., click this button to restart intelligent function.

9

[Lock camera position] checkbox
Select this checkbox to move the camera position to a

preset position selected from the preset selection box

and lock it there. Lock the camera position when

specifying detection settings to obtain a correct

detection result.

If camera control privileges are not obtained, this

function is grayed out.

A

q

Camera position selection box
Select the camera position from the view restriction

presets or the home position. Use the Preset Setting

Tool to set presets or the home position (P. 5-16).

A

a

[Detection Setting List]
A list with the specified detection settings is shown.

A

s

[Add]
The [New Detection Settings] dialog box is shown and

detection settings can be added.

A

d

[Delete]
Delete detection settings selected from the detection

setting list.

A

f

[Detection Setting Number], [Detection Type]
The detection setting numbers and detection types

selected from the [Detection Setting List] are shown.

A

g

[Enable these detection settings] checkbox
Select this checkbox to enable the detection settings

that are selected in the detection setting list.

A

h

[Detection Criteria] tab, [Event] tab
Switch between the Detection Criteria and Event tabs.

• [Detection Criteria]

Specify detection setting name, detection area, and

detection criteria (P. 5-27).

• [Event]

Specify operations to be performed when events

occur (P. 5-27).

A

j

[Restore settings]
Clear the settings you have specified on the screen of

the tool and restore the settings saved in the camera.

A

k

[Save settings]
Save the edited detection settings in the camera.

After the detection settings have been specified, be

sure to save the settings in the camera by clicking

[Save settings].

Important

It takes several ten seconds for intelligent function to restart.

No detection is performed while restarting.

Advertising