Application (camera) messages – Canon VB-S800D User Manual

Page 152

Advertising
background image

152

V420 Could not start intelligent service [crit]

V421 Intelligent service error [crit]

„ Application (Memory Card) Messages

M001 Starting and stopping of memory card control

module [info]

M203 Not enough space on memory card [warning]

M204 Invalid file removed [warning]

M301 Memory card control module error [err]

„ Application (Camera) Messages

C001 Starting and stopping of camera control module

[info]

C002 Camera application started [info]

C201 Day/Night mode switching warning [warning]

C211 Camera control command overflow [warning]

„ HTTP Server Messages

H143 User name specification error [notice]

H144 Password specification error [notice]

Description

intelligent initialization error [%1] [%2] .
(V420)

%1

Error number

%2

Cause of error

Meaning

Failed to initialize intelligent service.

Countermeasure

If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.

Description

intelligent working error [%1] [%2] . (V421)

%1

Error number

%2

Cause of error

Meaning

An error that does not permit recovery
occurred while intelligent service was
running.

Countermeasure

If the problem persists after rebooting, the
camera is faulty. Arrange for servicing.

Description

%1 sdctrl (M001)

%1

Starting or stopping

Meaning

The memory card control module (sdctrl)
has started or stopped.

Description

There is not available space (M203)

Meaning

Insufficient memory card capacity.

Description

Invalid file %1 was removed. (M204)

%1

Name of removed file

Meaning

An invalid file was removed.

Description

%1 process failure (M301)

%1

mount or unmount

Meaning

Mount or unmount process failed.

Description

%1 camerad (C001)

%1

starting | stopping

Meaning

The camera control module started/
stopped.

Description

starting cameraappl (C002)

Meaning

The camera application started.

Description

Can’t switch Day/Night mode, because
current mode is Auto. (C201)

Meaning

Could not switch day/night mode.

Countermeasure

Set Day/Night mode manually.

Description

command queue overflowed (C211)

Meaning

The camera control command queue
overflowed, and some commands were
discarded.

Countermeasure

Allow a longer interval (200 ms) for sending
the camera control command.

Description

(http_auth.c.XXX) get_password failed,
IP:%1 (H143)

%1

IP address

Meaning

An unknown user was specified in user
authentication.

Description

(http_auth.c.XXX) password doesn't match
for %1 username%2, IP:%3 (H144)

%1

URL XSS vulnerability countermeasure
implementation (process equivalent to ftpd)

%2

User Name

%3

IP address

Meaning

A wrong password was specified in user
authentication.

Advertising
This manual is related to the following products: