Access control] setting user access privileges, S (p. 60) – Canon VB-S800D User Manual

Page 60

Advertising
background image

60

Authorized User Account

(1) [User Name], [Password]

Enter the user name and password and then click

[Add]. The authorized user will be added to the user

list.

The user name can consist of up to 15 (single-byte)

characters using A to Z, a to z, 0 to 9, “-” (hyphen) and

“_” (underscore).

The password can consist of 6 to15 (single-byte)

ASCII characters (space or printable characters).

(2) [User List]

A list of authorized users is shown. User authorities

can be set for these users. Up to 50 users can be

registered in addition to the Administrator (root).

Also, the user list can be sorted using the

S T

buttons on the right.

To delete a user, select the applicable user from the

user list and then click [Delete].

User Authority

[Privileged Camera Control], [Camera Control], [Video
Distribution], [Audio Distribution]

Set the user authorities of authorized users and guest

users. Select the checkboxes corresponding to the

items you want to permit for each user.

Note

Authorized users have higher authorities than guest users.

For details, see “User Authorities and Camera Control Privileges”

(p. 120).

IPv4 Host Access Restrictions

(1) [Apply Host Access Restrictions]

Set IPv4 host access restrictions to [Disable] or

[Enable].

(2) [Default Policy]

If IPv4 host access restrictions are applied, select

[Authorize Access] or [Prohibit Access] for the default

policy.

(3) [Network Address / Subnet]

Create a list of permitted hosts and restricted hosts

and set IPv4 address access for each host to [Yes] or

[No].

You can specify the subnet and set access

restrictions by network or host.

If access is prohibited, access to all ports is

restricted.

Note

If the same address is duplicated, the policy for the address that
appears highest on the list will be applied.

[Access Control] Setting User Access Privileges

The following can be set here.

• Authorized User Account

Register who can access this camera.

• User Authority

Set the authorities for authorized users and guest

users.

• IPv4 Host Access Restrictions

Specify the hosts from which IPv4 access is

permitted and restricted.

• IPv6 Host Access Restrictions

Specify the hosts from which IPv6 access is

permitted and restricted.

Important

• To prohibit access via a proxy server in HTTP connection, a

proxy server address must be set.

• If host access restriction is set mistakenly, access to the

setting pages themselves may be prohibited, in which case
restoring the factory default settings will become the only

means for recovery.

Advertising
This manual is related to the following products: