Performing maintenance, P. 73), P. 73 – Canon VB-S800D User Manual

Page 73

Advertising
background image

73

S

et

ting P

age

4

Device Information

[Model Name], [Firmware Version], [Serial Number], [Build
Number], [MAC address]
Displays information about the currently connected

camera.

Tool

(1) [View Logs]

Display a history of camera operations and

connections to each viewer, etc.

(2) [View Current Settings]

Display a list of current settings.

(3) [Reboot]

The camera is rebooted.

The camera angle will return to the home position. If a

home position has not been registered, the camera

will return to the factory default home position setting.

See p. 92 for details on registering a home position.

(4) [Restore Default Settings]

Except for the following items, all user-defined

settings will be discarded and restored to factory

default settings after the camera is rebooted.

– Network administrator password, LAN, IPv4, IPv6

– Date and time

– Host access restrictions for access control

– SSL/TLS

– 802.1X

(5) [Back Up Settings]

Back up all settings, other than the date and time, to a

memory card.

The IP address, SSL or 802.1X certificates, and

private key files are also backed up.

(6) [Restore Settings]

Restore all settings, other than the date and time, from

a backup file on a memory card.

The IP address, SSL or 802.1X certificates, and

private key files are also restored.

The camera reboots after settings are restored.

Note

• It is recommended that you write down all current setting

values before restoring factory default settings in [Restore
Default Settings] (p. 161).

• The camera can be restored to factory default settings using

the reset switch as well. Note, however, that this will reset all

camera settings to factory default settings except for date and

time (p. 160).

[Maintenance]
Viewing Current Settings, Event Logs and Performing Maintenance

The following items can be used here.

• Device Information

Display information about the current device.

• Tool

Display or Initialize Camera Settings

Caution

• You must not turn off the camera while it is

performing the [Restore Default Settings], [Back
Up Settings] or [Restore Settings] operation.
Turning off the camera at this stage may result in
making it unable to boot correctly.

Important

If the restored settings were backed up from a different camera,

note that an address conflict on the network may occur.

Advertising
This manual is related to the following products: