Camera angle] digital zoom settings, P. 74), Setting the exposure compensation – Canon VB-S800D User Manual

Page 74

Advertising
background image

74

(1) Video Display Area

Displays video currently captured by the camera.

(2) [Resize] button

Each time this button is clicked, the screen size of the

video display area switches between “480 x 270” and

“960 x 540”.

(3) [Reconnect] button

The camera is reconnected.

(4) [Zoom] slider, [Zoom] buttons

These control the digital zoom ratio.

The [Zoom] slider zooms in (telephoto) by moving the

knob upwards or zooms out (wide-angle) by moving

the knob downwards.

The [Zoom] buttons zoom in or out continuously while

pressed, and stop when released.

(5) [Control for Admin] button

This button displays the [Exposure Compensation]

slider.

(6) [Image Flip] selection box

Select the orientation of the camera video. If [Enable]

is selected, the video is displayed rotated by 180

degrees.

(7) [Save settings]

Save the current zoom and [Image Flip] settings in the

camera.

If the zoom or [Image Flip] settings have been

changed, be sure to save the settings in the camera

using the [Save settings] button.

(8) [Restore settings]

Discard the settings you have specified and restore

the settings saved in the camera.

Note

• [Camera Angle] can be operated from the Setting menu only

on the VB-S800D/VB-S900F. It cannot be operated from Admin
Viewer or VB Viewer.

• Connecting to the camera from the [Camera Angle] menu will

disconnect connections from each type of viewer and

recording software that are not connected via RTP.

• The higher the digital zoom ratio, the lower the video quality

becomes.

• Revise the following settings after saving the [Camera Angle]

settings.

- Privacy mask settings
- Preset settings

- Intelligent function settings

• [Camera Angle] supports connection to a single camera for up

to 30 minutes.

„ Setting the Exposure Compensation

You can set any of nine levels of video brightness.

To darken the video, drag the slider toward [Dark]. To

brighten the video, drag the slider toward [Bright].

Note

• The exposure compensation value set by [Camera Angle] is

not reflected under [Camera] > [Initial Camera Settings] >
[Exposure Compensation] (p. 42).

• After [Exposure] is set to [Manual] and adjusted in Admin

Viewer (p. 135), [Exposure] is automatically reset to [Auto].

[Camera Angle] Digital Zoom Settings

The following can be set here.

• Zoom operations

Operate the digital zoom function.

• Image Flip

Flip the video image vertically.

• Control for Admin

Set the exposure compensation.

(1)

(2)

(3)

(4)

(5)

(6)

(8)

(7)

Advertising
This manual is related to the following products: