Canon DP-V3010 - Manual (Page 40)

40 OSD Menu
Item Setting Options (underline indicates factory default)
Color Range Sets the quantization range.
• SDI Signal
Full: Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limit Range 1: Limits the black and white range.
Black level: 64 (10-bit)/256 (12-bit)
White Level: 940 (10-bit)/3760 (12-bit)
Limit Range 2: Limits black range.
Black level: 64 (10-bit)/256 (12-bit)
White Level: 1023 (10-bit)/4095 (12-bit)
• DisplayPort Signal
Automatic: Automatically switches the quantization range.
Full: Sets to Black level: 0; White level: 1023 (10-bit)/4095 (12-bit).
Limit Range 1: Limits the black and white range.
Black level: 64 (10-bit)/256 (12-bit)
White Level: 940 (10-bit)/3760 (12-bit)
Internal Sync Synchronizes four inputs for "4K Input".
On: Force synchronization.
Off: Do not force synchronization.
Picture Mode Sets the "Picture Mode".
Channel Name Sets the name of the selected channel. You can input up to 16 alphanumeric characters.
The factory default settings for each channel is shown in the following table.
CH1 CH2 CH3 CH4 CH5 to CH30
Input Configuration 3G-SDI 1 3G-SDI 2 Dual Link HD-SDI DisplayPort –
Select Input Signal 4K Input 4K Input 4K Input 4K Input 4K Input
Format Automatic Automatic Automatic Automatic Automatic
Color Range Full Full Full Automatic Automatic
Internal Sync Off Off Off Off Off
Picture Mode DCI DCI DCI DCI DCI
Channel Name (Blank) (Blank) (Blank) (Blank) (Blank)
– : not set
COP
Y