Canon DP-V3010 - Manual (Page 50)

50 OSD Menu
Item Setting Options (underline indicates factory default)
Display Controller Function Sets the function to assign to the F button on the display controller. Select an F button and assign a
function from the following list. The factory defaults for the display controller F buttons is as follow:
F1 :
H Delay (On, Off)
F2 : V Delay (On, Off)
F3 : Monochrome (On, Off)
F4 : Blue Only (On, Off)
F5 : Red Off (On, Off)
F6 : Green Off (On, Off)
F7 : Blue Off (On, Off)
F8 : Screen Scaling (Native Input Resolution, 200%, Automatic)
F9 : Backlight Scan (On, Off)
F10 : Knob Lock (On, Off)
The following functions can also be assigned:
Channel UP
Channel DOWN
Backlight Control(Local Dimming (High, Middle, Low), Global Dimming, Off)
Aspect Marker (On, Off)
Safety Zone Marker 1, 2 (On, Off)
Center Marker (On, Off)
Grid Marker (On, Off)
Time Code (On, Off)
Show OSD (On, Off)
CDL Override (On, Off)
CDL Save to Memory
CDL Load from Memory
CDL Export/Import
Note
• "H Delay"/"V Delay" can be set only for SDI signal.
• When "H Delay" is "ON", the image display position can be adjusted using the display
controller’s for video in 1280x720 / 24.00P, 25.00P, 30.00P format. Adjust with the menu
screen closed.
• When checking the blanking area using "H Delay"/"V Delay", an audio signal check can be
performed, however some data is not displayed.
• When changing channels with "Channel UP/DOWN", the channels with "Input Configuration"
( 39) set to "–" are skipped.
• When "CDL Override" is turned "On", you cannot adjust the POWER, SATURATION, OFFSET,
or SLOPE.
• When the "Backlight Control" setting is switched using an F button, the information is applied
to "Backlight Control" in "Picture Mode". Likewise, when any marker settings are changed,
those changes will be applied to "Enable" under the currently selected "Marker Preset".
Display Controller Channel Sets the channel to assign to the CH button on the display controller.
Select a CH button and register a channel number. A list of settings under the menu "Channel
Settings" (
39) is displayed.
Display Name Sets the name of the main unit. You can input up to 16 alphanumeric characters.
Date/Time Sets the year/month/date/hour/minute.
Power Indicator Brightness Adjusts the brightness of the power indicator on the main unit. 5 is the brightest.
Off, 1 to 5 (2)
COP
Y