Canon XA20 - Manual (Page 146)

Appendix: Menu Options Lists
146
[Data Code]: Displays the date and/or time when the scene or photo was recorded.
[( Camera Data]: Displays the aperture (f-stop) and shutter speed used when recording the scene
or photo.
[TV Type]: When you connect the camcorder to a TV using the supplied STV-250N Stereo Video Cable,
select the setting according to the type of TV in order to display the picture in full and in the correct
aspect ratio.
[+ 4:3 TV]: TV sets with 4:3 aspect ratio.
[, Wide TV]: TV sets with 16:9 aspect ratio.
• When the TV type is set to [+ 4:3 TV], during the playback of video originally recorded with an
aspect ratio of 16:9, the picture will not be displayed fullscreen.
Recording Setup
Menu item Setting options A
y }
[Movie Format] [ · AVCHD], [¸ MP4] z – – 38
[Recording
Mode] For AVCHD movies:
[28 Mbps LPCM (50.00P)], [28 Mbps (50.00P)],
[24 Mbps LPCM], [24 Mbps], [17 Mbps], [5 Mbps]
For MP4 movies:
[35 Mbps (50.00P)], [24 Mbps], [17 Mbps], [4 Mbps],
[3 Mbps]
z
– – 46
[Recording
Media] [ v Rec Media for Movies]:
[ 6 Mem. Card A], [7 Mem. Card B]
z
– – 38
[ { Rec Media for Photos]:
[ 6 Mem. Card A], [7 Mem. Card B]
z z z
[Dual/Relay
Recording] [Standard Recording], [Dual Recording], [Relay Recording] z – – 48
[Frame Rate] For AVCHD movies:
[
50.00i], [ PF25.00]
For MP4 movies:
[
25.00P]
z – – 49
[Slow & Fast
Motion] [ i On], [j Off] z – – 50
[Video Snapshot
Length] [C 2 sec], [D 4 sec], [F 8 sec] z – – 90
[Time Code
Mode] [ Preset], [ Regen.] z – – 75
[Time Code
Running Mode] [ Rec Run], [ Free Run] z – – 75
[Initial Time
Code] [Reset], [OK] z – – 75
[User Bit Type] [ Setting], [ Time], [ Date] z – – 77
[Color Bars] [ j Off], [ EBU], [ SMPTE]
z
– – 89
[1 kHz Tone] [ ü -12 dB], [þ -18 dB], [ÿ -20 dB], [j Off] z – – 89
[File Numbering] [m Reset], [n Continuous] z z z –
COP
Y