Canon XA20 - Manual (Page 174)

Optional Accessories
174
Battery Packs
When you need extra battery packs, select one of the following
models: BP-820 or BP-828.
When you use battery packs bearing the Intelligent System mark, the
camcorder will communicate with the battery and display the
remaining usage time (accurate to 1 minute). You can only use and
charge these battery packs with camcorders and chargers
compatible with Intelligent System.
CG-800E Battery Charger
Use the battery charger to charge the battery packs.
Charging, Recording and Playback Times
The charging times given in the following table are approximate and vary according to charging
conditions and initial charge of the battery pack.
Recording and playback times given in the following tables are approximate and vary according to
recording mode and charging, recording or playback conditions. The effective usage time of the
battery pack may decrease when recording in cold surroundings, when using the brighter screen
settings, etc.
Recording AVCHD movies
Battery pack
→
BP-820 BP-828
Charging conditions
↓
Using the camcorder 275 min. 405 min.
Using the CG-800E Battery Charger 190 min. 260 min.
Battery pack Recording mode
Recording (maximum) Recording (typical)* Playback
OLED Viewfinder OLED Viewfinder OLED
BP-820
28 Mbps LPCM (50.00P) /
28 Mbps (50.00P)
145 min. 145 min. 90 min. 90 min. 225 min.
24 Mbps LPCM / 24 Mbps 155 min. 155 min. 90 min. 90 min. 235 min.
17 Mbps 155 min. 155 min. 90 min. 90 min. 235 min.
5 Mbps 160 min. 160 min. 95 min. 95 min. 240 min.
BP-828
28 Mbps LPCM (50.00P) /
28 Mbps (50.00P)
220 min. 220 min. 135 min. 135 min. 350 min.
24 Mbps LPCM / 24 Mbps 235 min. 230 min. 140 min. 140 min. 355 min.
17 Mbps 235 min. 235 min. 145 min. 145 min. 355 min.
5 Mbps 240 min. 235 min. 145 min. 145 min. 365 min.
COP
Y