Saving the configuration, Cop y – Canon EOS C500 PL User Manual

Page 16

Advertising
background image

16

1

Review the access point’s configuration
and then press SET.

The first screen shows the access point’s SSID
and the type of connection. Push the joystick up/
down or turn the SELECT dial to review additional
settings before pressing SET.

2

Save the current configuration.

Select the desired configuration number and then
press SET. You can save up to 5 different network
configuration profiles on the camcorder. If you
select a configuration number that was already in
use, the previous configuration will be overwritten
by the new.

Select [OK] and then press SET. When the
confirmation screen appears, press SET.

The camcorder will connect to the network using
the configuration just saved. The

icon will

appear on the upper left of the screen, first in
yellow while connecting and then in white when
the connection is established. In the rear panel,
the bars of the

icon indicate the strength of the

Wi-Fi signal.

Saving the Configuration

COP

Y

Advertising
This manual is related to the following products: