Canon RM-Software - Manual (Page 122)

122
„ Warning Messages in the Viewer
„ Confirmation Messages in the Viewer
Message Cause
Event notification Invalid E-mail Address. Characters other than alphanumeric characters
and the underscore (_) were entered for the e-mail
address.
The SMTP server port is invalid. Please specify a
value between 1 and 65535. An invalid SMTP server port number was entered.
The POP server port is invalid. Please specify a
value between 1 and 65535. An invalid POP server port number was entered.
User management The user name already exists. Tried adding a user to the Storage Server with a
name that already exists.
Unable to change the user name. The user '<user
name>' already exists. Tried adding a user name on the Storage Server to
a name that already exists.
Please ensure that the password and confirmation
match exactly. The password in the [Confirm Password] field does
not match the user password.
Are you sure you want to remove this user? Tried to delete a user.
The number of connecting viewers has exceeded
the recommended number, and the recording
server is under high load. Tried connecting 7 or more Viewers at one time.
Configuration The value for maximum must be greater than or
equal to 1 day. Tried to specify less than one day for the maximum
storage period.
Adding a recording schedule Streaming for recording is applied only when the
following conditions are satisfied:
– the video stream format is JPEG
– the frame rate settings do not exceed 10 fps
– there is no existing recording-mode stream in
the camera.
Tried to enable a recording-mode stream.
Message Cause
Adding and editing a camera Are you sure you want to remove the camera
'<camera name>'? If the camera is removed, you
will not be able to play back recorded video. Tried to delete the camera.
Viewer window This will replace an existing layout of the same
name. Are you sure you want to continue? Tried to save the current layout with a name that
already exists.
Managing a layout This layout is included in a layout sequence open
in another tab or window. Are you sure you want to
continue? Tried to change and save settings for a layout
included in a sequence that is open in another tab
or window.
Are you sure you want to delete the selected layout
'<layout name>'? Tried to delete a layout.
Are you sure you want to delete the folder '<folder
name>'; including all layouts and layout
sequences inside it? Tried to delete a layout folder.
Shared layout sequences cannot contain personal
layouts. All of the personal layouts will be
automatically removed from this layout sequence.
Are you sure you want to continue? Tried adding a user layout to a shared layout
sequence.
Are you sure you want to delete layout sequence
<layout sequence name>? Tried to delete a layout sequence.