Set a weekly schedule, Specify the recording period and day of the week, P. 74) – Canon RM-Software User Manual

Page 74

Advertising
background image

74

Set a Weekly Schedule

Hint

You can select more than one camera by holding down the Shift

key or Ctrl key and clicking the cameras.

➀ Recording time settings area

Specify the day of the week and the start and end time

of the recording period.

➁ Recording mode list

Select the recording mode.

➂ Recording settings area

Configure the settings for the recording mode selected

in

➁.

➃ [OK] and [Cancel]

Close the dialog box.

Specify the Recording Period and Day of the
Week

• To record for the entire day without specifying a

start and end time, click [All Day].

• To specify a recording period, enter the start time

in [Start Time] and the end time in [End Time]. Use

these items when you want to specify a recording

time that goes past midnight, such as when

recording late into the night. Alternately, select a

duration for the recording (minimum of 15 min.) in

the [Duration] field.

If [Restrict Service Time] is enabled on the camera,

recording will take place only during the service time,

irrespective of the recording schedule.

Note

• You cannot specify overlapping recording schedules on the

same camera.

• The time of the recording schedules is based on the Storage

Server clock. We recommend that you synchronize the clocks
on all the Storage Server you are using.

• If you set the operating system to automatically handle daylight

saving time, the time will be automatically adjusted on the first

and last days of the daylight saving time period.

1

In the schedule area, click the camera that you want to
add the schedule to.

2

Click [Add Schedule Item] to display the [Edit Schedule
Item] dialog box.

1

Specify the recording period.

2

Select the check boxes for the days of the week on
which to repeat the recording in [Repeat On].

Advertising