P. 78), Motion detection recording settings” (p. 78, P. 78 – Canon RM-Software User Manual

Page 78: Motion detection recording settings

Advertising
background image

78

The other settings are the same as those for continuous

recording. For details, see “Continuous Recording

Settings” (p. 76).

Note

• The number of tabs depends on the number of compatible

external devices (sensors) that are connected to the camera.

• The name of the external device that is registered in the

camera is displayed in the [Sensor Name] box.

• If two sensor recording schedules with the same priority are

set, the schedule that is triggered first takes precedence. If the
second schedule is still present when the first schedule ends,

the second schedule will start recording.

„ Motion Detection Recording Settings

Using the Camera for Motion Detection

➀ [Do not record]

Select this item if you do not want recording to start

when motion is detected.

Hint

You can use this setting to individually enable or disable

recording for each area. For example, you may want to record

when motion is detected around a vault, but not record when
motion is detected around an entrance.

➁ [Start Recording]

Start recording when motion is detected.

➂ [Priority]

Select the event priority. For details, see “Check

Events (p. 104).

Important

• When you select the [Sensor Recording] check box in the

recoding mode list in step 1, [Do not record] is selected for

all of the sensors. You must select [Start Recording] for at

least one sensor to be able to start sensor recording.

• The sensor inputs can generate a large number of events for

the Storage Server, thereby increasing the load on the
server. For reference, if the Storage Server is continuously

receiving more than 10 events per minute, we recommend

that you use continuous recording mode.

• If the recording period for a schedule ends while sensor

recording is in progress, recording will stop.

Important

The motion detection feature is not suitable for applications

where high reliability is required. We recommend that you do

not use the motion detection feature in applications such as
surveillance, which require high reliability. Canon cannot take

responsibility for any accidents or damages associated with

using the motion detection feature.

1

Click [Motion Detection Recording] in the recording
mode list and select the check box.

2

Select [Camera] in the [Detect Motion Using] box.

3

Configure the recorded image and event settings on
each area tab.

Advertising