Changing settings, C op y – Canon EOS C300 User Manual

Page 35

Advertising
background image

35

You can edit the Wi-Fi network settings even after the initial setup. Changing settings manually
requires more advanced knowledge of Wi-Fi and network settings. The Wi-Fi connection will be

disabled while you change these settings. After completing the changes, the camcorder will

connect to the Wi-Fi network using the new configuration.

1

Select the network configuration profile
you want to change (
A 26).

2

Open the Wi-Fi [Edit] submenu.

[w Other Functions] > [Wi-Fi Remote] > [Edit]

3

Continue with one of the following
procedures depending on the settings
you wish to change.

Changing Wi-Fi Settings

4

Select [LAN Setup] and then press SET.

The wireless connection mode selection screen

appears. Continue the procedure as described in
Manual Setup/AP Mode/Ad Hoc Connection

(A 14, from step 2).

Changing TCP/IP Settings

4

Select [TCP/IP] and then press SET.

The TCP/IP settings screen appears.

5

Select [IP Address Assignment] and
then press SET.

6

Select [Automatic] or [Manual] and then
press SET.

If you selected [Automatic], IP settings will be
assigned automatically and no further settings are

necessary.

Select [L], press SET and then close the menu.

Changing Settings

COP

Y

Advertising
This manual is related to the following products: