Canon EOS C300 - Manual (Page 4)

4
Turn off the camcorder before attaching the WFT-E6 Wireless File Transmitter. The transmitter
is powered by the camcorder. Make sure the camcorder’s battery pack is sufficiently charged
before using the transmitter.
1
Turn off the camcorder.
2
Open the WFT terminal cover.
3
Attach the transmitter.
Align the transmitter’s terminal to the camcorder’s
WFT terminal as shown in the illustration and
firmly push it in (
ቢ).
Turn the tightening screw in the direction of the
arrow until it stops to securely attach the
transmitter (
ባ).
#/$ You may find the WFT terminal
easier to access if you remove the camcorder’s
grip unit.
4
Attach the supplied WFT Attachment
Bracket.
Position the bracket so it covers the transmitter’s
attachment pin and tighten the screw.
Attaching to a Camcorder
ቢ
ባ
ቢ
ባ
ባ
ቢ
Î
COP
Y