Canon PIXMA iP2850 - Manual (Page 164)

Settings on Print Server
When you use the printer on a network, set up the printer driver for sharing on the print server system.
The procedure for setting up the print server systems is as follows:
1. Install the printer driver on the print server system
2. Check that the printer to be used has been added
Open System Preferences, and select Print & Scan (Print & Fax).
The printer list displays the printers that are connected to the computer.
3. Set sharing
Check the Share this printer on the network check box.
Note
• Depending on the environment you are using, a message prompting you to restart the computer may
be displayed. To complete the installation properly, restart the computer.
The setup on the print server system is complete. Next, set up the client systems.
164