Changing the printer operation mode – Canon PIXMA iP2850 User Manual

Page 90

Advertising
background image

Changing the Printer Operation Mode

If necessary, switch between various modes of printer operation.

The procedure for configuring Custom Settings is as follows:

1. Make sure that the printer is on, and then select Custom Settings from the pop-up menu

on the

Canon IJ Printer Utility

Note

• If the computer is unable to communicate with the printer, a message may be displayed because

the computer cannot access the function information that was set on the printer.
If this happens, click Cancel to display the most recent settings specified on your computer.

2. If necessary, complete the following settings:

Ink Drying Wait Time

You can set the length of the printer rest time until printing of the next page begins. Moving the
slider to the right increases the pause time, and moving the slider to the left decreases the time.
If the paper gets stained because the next page is ejected before the ink on the printed page dries,
increase the ink drying wait time.
Reducing the ink drying wait time speeds up printing.

3. Apply the settings

Click Apply and when the confirmation message appears, click OK.

The printer operates with the modified settings hereafter.

90

Advertising