Canon XF305 - Manual (Page 102)

Recording
102
3
Special Recording Modes
Special Recording Modes The camcorder features 4 special recording modes.
Interval recording ([Interval Rec]): The camcorder will automatically record
a pre-defined number of frames at a pre-defined interval. This mode is
suitable for recording subjects with little movement, such as natural
surroundings or plants.
Frame recording ([Frame Rec]): The camcorder will record a pre-defined
number of frames every time you press the START/STOP button. This
mode is suitable for recording stop motion animation.
Slow & fast motion recording ([Slow & Fast Motion]): This mode allows
you to change the shooting frame rate to achieve a slow motion or fast
motion effect during playback.
Pre-recording ([Pre Rec]): The camcorder will start recording
approximately 3 seconds before you press the START/STOP button. This
is especially useful when it is difficult to predict when to start recording.
Interval Recording Mode
Set the interval and number of frames in advance. Sound is not recorded
in this mode. This mode is not available if [J Other Functions]
[Bit
Rate/Resolution] is set to [35 Mbps 1440x1080].
Configuring Interval Recording Mode
1 Open the [Interval] submenu.
[J Other Functions] [Interval Rec] [Interval]
2 Select the desired interval and then press SET.
• See the following table for the available intervals.
3 Select [Rec Frames], select the desired number of frames and then
press SET.
• Available options are 2, 6 and 12.
Operating modes:
[J Other Functions]
[Interval Rec]
[Interval]
[1 sec]
[J Other Functions]
[Interval Rec]
[Rec Frames]
[2]
COP
Y