External monitor 147, Cop y – Canon XF305 User Manual

Page 147

Advertising
background image

147

External Connections

6

Connecting to an External Monitor

NOTES

• If necessary, you can superimpose the onscreen displays on the video

displayed on the external monitor (0 147).

Using the AV or VIDEO 2 Terminal

When you output video from the AV terminal or VIDEO 2 terminal, the
video signal is converted to an analog SD composite video signal. While
the VIDEO 2 terminal outputs only video, the AV terminal also outputs
audio. You can select the SD output method (0 144).

NOTES

• If necessary, you can superimpose the onscreen displays on the video

displayed on the external monitor (0 147).

• When you play back a clip on a monitor with a 4:3 aspect ratio, the

monitor will switch automatically to widescreen mode if it is compatible
with the WSS system.

Superimposing Onscreen Displays to Appear on an
External Monitor

You can choose to superimpose onscreen displays on the video output
from the HD/SD SDI terminal (b only), HDMI OUT terminal, HD/SD
COMPONENT OUT terminal, AV terminal or VIDEO 2 terminal. Doing so
will display the onscreen displays on an external monitor. You must set
this function separately for HD and SD output. This setting will not affect
your recordings.

1 Open the [HD Onscreen Disp.] or [SD Onscreen Disp.] submenu.

[N Video Setup]

[HD Onscreen Disp.] or [SD Onscreen Disp.]

2 Select [On] and then press SET.

• G appears on the right side of the screen (when [M LCD/VF

Setup]

[Custom Display]

[Output Display] is set to [On]).

NOTES

• Onscreen displays will not appear on an external monitor for SD output

if [N Video Setup]

[SD Output] is set to [Side Crop].

[N Video Setup]

[HD Onscreen Disp.]

[SD Onscreen Disp.]

[Off]

COP

Y

Advertising
This manual is related to the following products: