Cop y, Preparing the camcorder – Canon XF305 User Manual

Page 35

Advertising
background image

35

Preparations

2

Preparing the Camcorder

Removing and Attaching the Terminal Covers

Remove the covers for the following terminals in order to access them.

* b only.

Removing the Terminal Covers

1 Open the terminal cover and pull it out.

2 Grasp the strip connecting the terminal cover to the camcorder and

pull.
This step is not necessary for the covers for the HD/SD SDI,
GENLOCK, TIME CODE and VIDEO 2 terminals.

Attaching the Terminal Covers

Insert the connecting strip into the opening to attach the terminal cover.

NOTES

• If the connecting strip is difficult to grasp, use a pair of tweezers or

similar tool.

Using the Wireless Controller

Inserting the Battery

Insert the supplied CR2025 lithium button battery into the wireless
controller before use.

1 Press the tab in the direction of the arrow (

ቢ) and pull out the battery

holder (

ባ).

2 Place the lithium button battery with the + side facing up (

ቤ).

3 Insert the battery holder (

ብ).

Activating the Wireless Controller

1 Open the [Wireless Controller] submenu.

[J Other Functions]

[Wireless Controller]

2 Select [On] and then press SET.

• HD/SD SDI terminal*
• GENLOCK and TIME CODE terminals*
• VIDEO 2 terminal

W (headphone) and REMOTE terminals

• HD/SD COMPONENT OUT terminal
• AV terminal
• USB and HDMI OUT terminals

[J Other Functions]

[Wireless Controller]

[On]

Operating modes:

COP

Y

Advertising
This manual is related to the following products: