Canon LE-5W - Manual (Page 81)

81 Menu function settings
H.Size 3D Invert
Adjusting the projection width of the
input signal
(Analog PC)
MENU > H.Size
This function allows you to adjust the
horizontal width of the screen, making it wider
or narrower.
Press the / buttons to adjust the values.
When you have finished making adjustments,
press the MENU button or the BACK button.
• This is only available when an analog PC
image is being input.
• Use this if the image is not projected
correctly even after executing the AUTO
PC function. (
P21 )
Adjusting 3D images
MENU > 3D Invert
This function allows you to adjust 3D content
when the images are hard to view. Changes the
display sequence of the image on the left and
right.
Select the 3D Invert with the OK button, press
the /
buttons to select the option, and then
press the OK button to confirm your selection.
Press the MENU button or the BACK button.
• This is only available when 3D image
signals are being projected.
• See "Watching 3D content" on page 85 for
details.
On Changes the display sequence
of the image on the left and
right.
Off Does not change the display
sequence of the image on the
left and right.