Preparing the camcorder 23, Attaching the microphone holder, Unit 23 – Canon XA10 User Manual

Page 23: Attaching the handle unit 23, Cop y

Advertising
background image

Preparing the Camcorder

23

Preparing the Camcorder

This section covers the basic preparations for the camcorder such as attaching the handle unit and
lens hood, and adjusting the viewfinder and LCD screen. When attaching the lens hood, grip belt and
straps, be careful not to drop the camcorder.

Attaching the Microphone Holder Unit

Use the supplied screws to attach the microphone holder unit to
the handle unit.

Attaching the Handle Unit

1 Align the handle unit with the front and rear sockets and

then slide the handle unit forward until it is in place.

• Make sure the screws are raised when you slide the handle

unit.

2 Firmly tighten the front and rear screws with a coin or

similar object.

NOTES

• The camcorder is functional even if you remove the handle

unit. However, some audio options (

0 72, 75), the infrared

light and tally lamp will not be available.

COP

Y

Advertising