Canon XA10 - Manual (Page 62)

Automatic Exposure Recording Programs
62
NOTES
• [ B Shutter-Pri. AE]:
- On screen only the denominator is displayed – [ B 250] indicates a shutter speed of 1/250 second,
etc.
- When recording in dark surroundings, you can obtain a brighter picture by using slow shutter
speeds; however, image quality may not be as good and autofocus may not work well.
- The image may flicker when recording with fast shutter speeds.
• [ C Aperture-Pri. AE]: The actual range of values available for selection will vary depending on the
initial zoom position.
• When setting a numeric value (aperture or shutter speed), the number displayed will flash if the
aperture value or shutter speed is not appropriate for the recording conditions. In such case, select
a different value.
• During exposure lock, the aperture value/shutter speed cannot be changed. Set the aperture value
or shutter speed before manually adjusting the exposure.
• If you set 6 [Custom Key/Dial] to [ o Tv / Av] ( 0 89), you can adjust the shutter speed or
aperture value with the CUSTOM dial.
COP
Y