Pre-recording 85, Cop y – Canon XA10 User Manual

Page 85

Advertising
background image

Pre-Recording

85

Pre-Recording

The camcorder will start recording 3 seconds before you press

g, ensuring you do not miss

important shooting opportunities. This is especially useful when it is difficult to predict when to start
recording.

1 Open the pre-recording screen.

[FUNC.]

[d Pre REC]

2 Touch [A On] and then touch [a].

• d will appear on the screen.

• Repeat, selecting [B Off], to turn off pre-recording.

3 Press

g.

• The scene recorded in the memory will start 3 seconds before

g was pressed.

NOTES

• The camcorder will not record the full 3 seconds prior to pressing

g if the button was

pressed within 3 seconds of having turned on pre-recording or having finished the previous
recording.

• Any of the following actions will deactivate the pre-recording function.

- Leaving the camcorder without any operation for 5 minutes.
- Changing the position of the mode switch.
- Pressing

S.

- Activating video snapshot.
- Setting the camcorder to standby mode.
- Touching any of the following control buttons in the FUNC. panel: [MENU], [Rec. Programs],

[White Balance], [AGC Limit], [Image Stabilizer], [Faders], [Decoration] or [Review Recording].

Operating modes:

COP

Y

Advertising