Cop y – Canon EOS C300 User Manual

Page 129

Advertising
background image

129

Connecting to an External Monitor

Using the HD/SD SDI Terminal

The digital signal output from the HD/SD SDI terminal includes the video
signal, audio signal and time code signal. If necessary, perform the
following procedure to change the output to HD or SD*. Turning the
output off will conserve the camcorder’s power.

* Not available for 24.00P recordings.

1 Open the [SDI Output] submenu.

[¢ Video Setup] > [SDI Output]

2 Select the desired option and then press SET.

• If you selected [SD], you can select the SD output method (A 130).

NOTES

• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor

(A 130).

Using the HDMI OUT Terminal

The HDMI

TM

OUT terminal also offers a digital connection and outputs both a video and audio signal. The output

signal will automatically switch to HD or SD* depending on the capability of the external monitor.

* Not available for 24.00P recordings.

NOTES

• Correct operation cannot be guaranteed when connecting the camcorder to DVI monitors.

• Video may not be output correctly depending on the monitor. In such case, use another terminal.

• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor

(A 130).

• You can select the SD output method (A 130).

Using the SYNC OUT Terminal

In addition to its function as a synchronization signal output terminal, you
can use the SYNC OUT terminal also as a terminal for analog video signal
output. You can output an HD component video luminance signal or a
down-converted SD composite video signal*.

* Not available for 24.00P recordings.

1 Open the [SYNC Output] submenu.

[¢ Video Setup] > [SYNC Output]

2 Select [HD-Y] or [Composite] and then press SET.

• If you selected [HD-Y] (HD component video, luminance signal), no more settings are necessary. If you

selected [Composite] (SD analog composite signal), you can select the SD output method with the following
procedure.

NOTES

• When you play back a clip on a monitor with a 4:3 aspect ratio, the monitor will switch automatically to

widescreen mode if it is compatible with the Video ID-1 or WSS system.

• If necessary, you can superimpose the onscreen displays on the video displayed on the external monitor

(A 130).

[¢ Video Setup]

[SDI Output]

[HD]

[¢ Video Setup]

[SYNC Output]

[Composite]

COP

Y

Advertising
This manual is related to the following products: