Embedding custom picture settings in a recording, Available custom picture settings, Embedding custom picture settings in a – Canon EOS C300 PL User Manual

Page 117: Recording 117, Available custom picture settings 117, Cop y

Advertising
background image

117

Custom Picture Settings

4 Press the CUSTOM PICTURE button to exit the custom picture menu.

Replacing a File on an SD Card with a File in the Camcorder

1 After selecting a file on the SD card to replace, open the

[Load From Cam.] submenu.

[+ / Transfer File] > [Load From Cam.]

2 Select the file to transfer to the SD card and then press SET.

3 Select [OK] and then press SET.

• The file on the SD card will be overwritten by the one on the camcorder. When the confirmation screen

appears, press SET.

4 Press the CUSTOM PICTURE button to exit the custom picture menu.

NOTES

• You can also copy a custom picture file embedded in a clip to the camcorder (A 135).

Embedding Custom Picture Settings in a Recording

By default, when you record video or take a photo with custom picture
settings applied to it, the custom picture file used to record it is
embedded in the image file. Later, those embedded settings in the video
or photo can be copied to the camcorder (A 152) and be applied to
future recordings. You may find that embedding custom picture settings in
a recording helps you keep track of them, such as verifying what settings
were used for a particular recording.

1 Open the [Add / File] submenu.

[w Other Functions] > [Add

/

File]

2 Select [To Clip] or [To Photo] and then press SET.

• Selecting [To Clip] will embed the custom picture file in a clip while selecting [To Photo] will embed the file in

a photo.

3 Select [On] or [Off] and then press SET.

Available Custom Picture Settings

The following are the available settings. Even if no custom picture file is selected, the default settings are still
applied to the picture.

[Gamma]

The gamma curve changes the overall look of the image. Generally, this should be the same setting as [Select]
under [Color Matrix]. (Default: [Normal 1]).

[Normal 1] to [Normal 4]: These settings are suitable for viewing the image on a TV monitor. Highlights in [Normal

2] are brighter than those of [Normal 1]. Dark tones in the lower part of the gamma
curve for [Normal 3] (ITU-R BT.709 standard) and [Normal 4] are more pronounced than
those of [Normal 2].

[Cine 1] or [Cine 2]:

Use [Cine 1] for a gamma curve that results in a picture with a cinema-like feel and
cinema-like tones. [Cine 2] has softer contrasts than does [Cine 1] but is also suitable
for creating a cinema-like picture.

[+ / Transfer File]

[Load From Cam.]

[w Other Functions]

[Add / File]

[To Clip] … [On]

[To Photo] … [On]

COP

Y

Advertising
This manual is related to the following products: