Canon EOS C300 PL - Manual (Page 118)

Custom Picture Settings
118
[EOS Std.]: This gamma curve approximates the look of an EOS digital SLR camera when the
picture style is set to [Standard] P (high contrast, vibrant colors).
[Wide DR]: Applies a gamma curve with a very wide dynamic range, optimized for playback on an
HDTV.
[Canon Log]: Applies a logarithmic gamma curve for outstanding dynamic range. Requires image
processing in post-production.
[Black]
Controls the black level and color cast of blacks.
[Master Pedestal]
The master pedestal increases or decreases the black level. Higher settings will make dark areas brighter but
decrease contrast. This setting can be adjusted from -50 to 50. (Default: ±0)
[Master Black]
Corrects color cast in blacks.
[Red]: -50 to 50 (Default: ±0)
[Green]: -50 to 50 (Default: ±0)
[Blue]: -50 to 50 (Default: ±0)
[Black Gamma]
Controls the lower part of the gamma curve (dark areas of the image). When [Gamma] is set to [Wide DR] or
[Canon Log], this setting has no effect on the picture.
[Level]: Raises or lowers the lower part of the gamma curve. This setting can be adjusted from -50 to 50.
(Default: ±0)
[Range]: Selects the range in which dark areas are affected. This setting can be adjusted from -5 to 50.
(Default: ±0)
[Point]: Determines the shape of the lower part of the gamma curve. This setting can be adjusted from -1 to 50.
(Default: ±0)
Normal 1
Wide DR
Canon Log
Input
Outp
ut
Canon log
Cine 1
Cine 2
Normal 4
Normal 2/3/4
Normal 3
Normal 1/2
Input
Ou
tp
u
t
Gamma
COP
Y