Removing a cf card, Inserting and removing an sd card, Cop y – Canon EOS C300 PL User Manual

Page 44

Advertising
background image

Preparing Recording Media

44

Removing a CF card

1 Wait until the access indicator for the card slot with the CF card

to be removed is off.

2 Slide the CF card slot cover switch in the direction of the arrow.

• The CF card slot cover will open upward (slot A) or downward (slot B).

3 Push the CF card release button.

• The release button partially pops out.

4 Push in the CF card release button to release the CF card.

5 Pull the CF card all the way out and close the CF card slot cover.

IMPORTANT

• Observe the following precautions while the CF2 or CF3 access indicator is illuminated in red. Failure to do

so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the cover of the CF card slot being accessed.

NOTES

• If you set the [w Other Functions] > [Media Access LED] function to [Off], the access indicators will not

illuminate.

Inserting and Removing an SD Card

1 Turn off the camcorder.

2 Open the SD card slot cover.

3 Insert the SD card all the way into the SD card slot until it clicks.

• The SD card slot is positioned at an angle. Align the SD card straight in

relation to the SD card slot, with the label facing the lens.

4 Close the SD card slot cover.

• Do not force the cover closed if the SD card is not correctly inserted.

IMPORTANT

• Observe the following precautions while the SD card access indicator is flashing. Failure to do so may result in

permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not remove the SD card.

• Turn off the camcorder before inserting or removing an SD card. Inserting or removing the SD card with the

camcorder on may result in permanent data loss.

• SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong

direction can cause a malfunction of the camcorder. Be sure to insert the SD card as described in step 3.

NOTES

To remove the SD card: Push the SD card once to release it. When the SD card springs out, pull it all the way

out.

• If you set the [w Other Functions] > [Media Access LED] function to [Off], the access indicators will not

illuminate.

,

SD card access
indicator

COP

Y

Advertising
This manual is related to the following products: