Canon EOS C300 PL - Manual (Page 57)

57
Recording Video
Rear Panel Displays
You can check the following information on the rear panel. This allows you to easily adjust main camera functions
like the shutter speed, white balance and ISO speed/gain even when the monitor unit is not attached to the
camcorder without having to use the viewfinder.
1
Displayed also in mode.
2
In these shutter speed modes, only the denominator is displayed - indicates a shutter speed of 1/100, etc.
3 Only displayed while adjusting the setting.
4
Only when an optional WFT-E6 Wireless File Transmitter is connected to the camcorder.
1
2
3
4
5 6 7 8
9
10
11
12
1 White balance (A 74)
2 Time code settings: NDF Non-drop frame (A 85)
/EXT-LOCK External time code signal locked
(A 89) / HOLD Time code display on hold
(A 86)
3 Time code (A 84)
4 Audio level meter
1
(A 93, 94)
5 White balance fine-tuning (A 74)
6 ISO speed/ Gain (A 65)
7 Shutter speed (A 62)/White balance
Shutter speed
2
(mode set to [Speed], [Slow]
or [Off])
Shutter speed (mode set to [Angle])
Shutter speed (mode set to [Clear Scan])
White balance fine-tuning
3
(A 74)
White balance, color temperature
3
(A 75)
8 # Aperture value (A 69)
9 ND filter (A 68)
10 Approximate remaining battery time
1
11 Wi-Fi
4
(A 49)
12 CF card status and available recording time
1
Adjusting the Brightness of the Rear Panel
Repeatedly pressing the (backlight) button will change the brightness of
the rear panel in the following order: Backlight on (bright)
 Backlight on
(dim)  Backlight off.
COP
Y