Canon DP-V3010 - Manual (Page 10)

10
 Display OSD menu “LUT Import” screen
Display item Description
LUT Type Selects the type of LUT to be imported. Select “Gamma” to import a 1D-LUT,
or “Color Gamut” to import a 3D-LUT.
File Name Selects the LUT file (.clut) name.
Base Color Gamut Selects the base color gamut when creating a 3D-LUT.
Execute Executes LUT file import.
 Error messages displayed on the display
Message Description
“LUT Type” is different. Displayed when a LUT file with a different LUT type is
imported.
Failed to read file.
• Displayed when there is an error in the USB memory or
when the USB memory is write-protected.
• Displayed when the LUT file is empty (0 bytes) or when
the LUT file could not be imported properly because the
USB memory was disconnected while importing the LUT
file, etc.
Failed to import. Displayed when there is some abnormality in the file to be
imported.
• DaVinci Resolve is trademark of Blackmagic Design Pty. Ltd.
• Pablo is trademark of Quantel Ltd.
• Other products may be trademarks of their respective companies.
• The contents noted in this manual are current as of December 2013.
MIE-0003-000
© CANON INC. 2013
COP
Y