Canon VB-C60 - Manual (Page 22)

22
Setup Procedure
22
System Installation Example
Note
It is strongly recommended that before
operation, you change the user name
“admin” and password created after
installation.
Configure the basic storage server settings.
In this example, we use the conditions shown in
“VK-Lite System Installation Example” and the
hard disk space calculated in “Step 1:
Preparation”. You should use values calculated
for your actual operating conditions.
• Set the Maximum retained history to 14
days.
• Use the default value of 10% for the Low
disk space warning level (A value of 10% or
more is recommended).
• Set the Maximum disk space used to 300
GB.
3
4
If the system is to be used by multiple users,
you need to add users using the User
Management tab.
• To add a user, click Add and set the user
name and password.
• To assign administrative privileges to the
user, check the Administrator checkbox.
COP
Y