Canon Wireless File Transmitter WFT-E7A - Manual (Page 28)

28
Configuring Network Settings
The following instructions are for setting screens that vary depending on the communication
method (FTP Transfer, EOS Utility, WFT Server, or Media Server), as shown below. Read the
page that describes the selected communication method.
FTP trans.
Chapter 2 (p.31)
EOSUtility
Chapter 3 (p.47)
WFTserver
Chapter 4 (p.53)
MediaServ.
Chapter 5 (p.65)
Completing Settings for the Communication Method
Windows 7 and Windows Vista Users
Before performing the operations described from page 47, perform the operations below. If these
operations are not performed, the WFT Pairing Software described on page 48 may not start.
Open the [C Drive]  [Program Files]  [Canon]  [EOS Utility]  [WFTPairing] folder (in this
order), and then double-click the [WFT FirewallSettings] icon.
After performing this operation, perform the operations described from page 47.
COP
Y