Canon Wireless File Transmitter WFT-E7A - Manual (Page 91)

91
Steps 1–5 are the same on master and slave cameras.
1 In the menu, select [Communication
settings].
2 Select [Network settings].
3 Set [Communication mode] to
[Disconnect].
Once [Communication mode] is set to
[Disconnect], you can select [Sync time between
cameras].
4 Select [Sync time between cameras].
X Select [OK] on the next screen displayed, shown
below.
5 Select [LAN Type].
After selecting [Wireless] or [Wired], select [OK].
Synchronizing the Time
COP
Y