Canon EOS 60DA - Manual (Page 33)

32 32
1
2
3
4
Introduction
Contents at
a Glance
Downloading
Images
Camera
Settings
Remote
Shooting
Reference
Preferences
Index
7 Click the [ ] button to shoot.
 The shot image is transferred to your computer and displayed in
the [Quick Preview] window. And then, DPP starts up
automatically.
 You can quickly review the shot image in the [Quick Preview]
window displayed before DPP starts up. You can also resize the
[Quick Preview] window.
 You can show/hide the [Quick Preview] window by clicking the
[Other Functions] button in the capture widow and selecting
[Quick Preview] from the menu that appears.
 You cannot perform RAW processing. If you connect the camera
to your computer during in-camera RAW processing, the camera
and computer will connect after you finish processing.
 On
you cannot set [Creative Auto].
You can also shoot using the <space> bar on the keyboard.
60D REBELT4i 650D REBELT3i 600D REBELT3 1100D
 You cannot operate the camera when the [Remote Live View
window] is displayed. Pressing the Live View shooting button (the
camera’s <SET> button on the
) will also display the
Live View image on the camera’s LCD monitor, allowing you to
view the image while operating the camera.
 You can shoot by operating the capture window, even if the
[Remote Live View window] is not displayed.
 To perform exposure simulation (p.40) with [Remote Live View
window] or enable display of histograms (p.95) , set your camera’s
Custom Function [Live View exposure simulation] to [Enable]. On
,
set [Exposure simulation] in the menu to [Enable].
 On
, you can
also use mirror lockup with remote shooting. (You cannot take
test shots after setting mirror lockup.)
 On , self-timer shooting is
possible.
 With , mirror lockup and Silent single shooting
cannot be performed in remote shooting.
 The [Test Shooting] window appears when you click the [Test
shooting] button.
During flash shooting, you can take a test shot under the same
conditions as an actual shot, and adjust the white balance based
on the shot test image (p.41) .
 You can save shot images to both your computer and a memory
card by checkmarking [Save also on the camera’s memory card]
in preferences ([Remote Shooting] window) (p.76) .
 You can change the software that starts up automatically when
remotely shot images are transferred to your computer from DPP
to ImageBrowser EX or other software in preferences ([Linked
Software] window) (p.77) .
 For a list of the [Remote Live View window] functions, see p.95 .
 For a list of the [Zoom View] Window functions, see p.97 .
1D Mk IV 1Ds Mk III 1D Mk III
40D REBELXSi 450D REBELXS 1000D
1D X 1D Mk IV 5D Mk III 5D Mk II 7D 60D 50D
1D X 1D Mk IV 5D Mk III 5D Mk II 7D 60D 50D
REBELT4i 650D REBELT3i 600D REBELT2i 550D
1D X 5D Mk III REBELT4i 650D
1Ds Mk III 1D Mk III
COP
Y