Canon ImageCLASS MF7480 - Manual (Page 194)

4‑59
Sending Documents
[ ◀] [▶]: Press to move the position of the
cursor.
[Backspace]: Press to delete the number
or character immediately to the left of the
cursor.
[Space]: Press to insert a space between
numbers.
You cannot insert a pause or a space at the
beginning of a number.
If you enter a pause at the end of the
number, the pause is always 10 seconds
long.
You can press (Clear) to clear your entry.
② Press [Option] or [Next].
If you want to specify the sending speed,
type of call, and ECM TX settings, press
[Option] and proceed to step 7.
Otherwise, press [Next] and skip to
step 15.
7
8
① Select the desired sending speed.
② Press [OK].
–
–
–
①
②
①
②
If your document transmissions are slow in
starting, this may mean that the telephone
lines in your area are in poor condition. Select
a slower speed. You can select [33600 bps],
[14400 bps], [9600 bps], or [4800 bps].
9
10
① Select the type of call.
Select [Domestic] for dialing domestic
(local) telephone numbers. Select [Long
Distance (1)] if communication errors
frequently occur when you make overseas
calls (when the overseas telephone
number is registered in the Address
Book). If errors persist, try selecting [Long
Distance (2)] or [Long Distance (3)].
② Press [OK].
11
①
②
①
②