Canon ImageCLASS MF7480 - Manual (Page 23)

What Can I Do with This Machine?
xxii
Do not install the machine in unstable locations, such as on unsteady platforms or
inclined floors, or in locations subject to excessive vibrations, as this may cause the
machine to fall or tip over, resulting in personal injury.
Never block the ventilation slots and louvers on the machine. These openings are
provided for proper ventilation of working parts inside the machine. Blocking these
openings can cause the machine to overheat. Never place the machine on a soft surface,
such as a sofa or rug.
Do not install the machine in the following locations:
A damp or dusty location
A location near water faucets or water
A location exposed to direct sunlight
A location subject to high temperatures
A location near open flames
Provide enough space on each side of the machine for unrestricted operation.
4" (100 mm) or more
49 1/4" (1,249 mm)*
* The depth is 50 5/8"(1,281mm) when
the cartridge holder is pulled out.
40" (1,016 mm)
Be sure to provide enough space over the top of the machine to be able to open the
feeder properly.
–
–
–
–
–
–
–
–
–
–