Canon ImageCLASS MF7480 - Manual (Page 18)

xvii
What Can I Do with This Machine?
Preface
Thank you for choosing a Canon product. Before using the machine, please read the
following instructions for your safety.
Important Safety Instructions
Please read these “Important Safety Instructions” thoroughly before operating the
machine. As these instructions are intended to prevent injury to the user or other persons
or destruction of property, always pay attention to these instructions. Also, since it may
result in unexpected accidents or injuries, do not perform any operation unless otherwise
specified in the manual. Improper operation or use of this machine could result in personal
injury and/or damage requiring extensive repair that may not be covered under your
Limited Warranty.
Handling and Maintenance
Do not attempt to disassemble or modify the machine. There are high‑temperature and
high‑voltage components inside the machine which may result in a fire or electrical
shock.
If the machine makes strange noises, or gives off smoke, heat, or strange smells,
immediately turn off the main power switch, and disconnect the power cord from the
power outlet. Then, contact Canon Authorized Service Facilities or the Canon Customer
Care Center. Continued use of the machine in this condition may result in a fire or
electrical shock.
Do not use highly flammable sprays near the machine. If gas from these sprays comes
into contact with the electrical components inside the machine, this may result in a fire or
electrical shock.
To avoid damage to the power cord and creating a fire hazard, always turn off the main
power switch, and unplug the interface cable when moving the machine. Otherwise, the
power cord or interface cable may be damaged, resulting in a fire or electrical shock. –
–
–
–