Canon ImageCLASS MF7480 - Manual (Page 255)

Scanning (imageCLASS MF7480/MF7470 Only)
7‑2
Scanning to a Computer
Follow this procedure to scan an original to your computer.
Make sure that Color Network ScanGear is installed. To check if Color Network
ScanGear is installed, see “Installing Software,” in the Starter Guide.
For details on the Color Network ScanGear settings, see the Color Network ScanGear
User’s Guide.
Enter the Scan Mode Place Your Originals
Press
SCAN
(SCAN).
The SCAN indicator lights up and the machine enters scan
standby mode.
Place the first page on the platen
glass if you are not using the feeder.
For Originals you can fax, see “Original Requirements,”
on p. 2‑2.