Canon ImageCLASS MF7480 - Manual (Page 34)

xxxiii
What Can I Do with This Machine?
Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted
by the ACTA. On the rear panel of this equipment is a label that contains, among other
information, a product identifier in the format of US:AAAEQ##TXXXX. If requested, this
number must be provided to the telephone company.
The REN (Ringer Equivalence Number) is used to determine the number of devices that
may be connected to a telephone line. Excessive RENs on a telephone line may result
in the devices not ringing in response to an incoming call. In most, but not all areas, the
sum of the RENs should not exceed five (5.0). To be certain of the number of devices that
may be connected to a line, as determined by the total RENs, contact the local telephone
company. The REN for this product is part of the product identifier that has the format US:
AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 10
is a REN of 1.0).
An FCC compliant telephone line cable and modular plug is provided with this equipment.
This equipment is designed to be connected to the telephone network or premise wiring
using a compatible modular jack that is Part 68 compliant.
This equipment may not be used on coin service provided by the telephone company.
Connection to party lines is subject to state tariffs.
In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described
in this guide or the Reference Guide, disconnect the equipment from the telephone line
cable and disconnect the power cord. The telephone line cable should not be reconnected
or the main power switch turned ON until the problem is completely resolved. Users
should contact their local authorized Canon Facsimile Service Dealer for the servicing of
equipment.
If your equipment malfunctions, please contact your local authorized Canon dealer
from whom you purchased the equipment (if under warranty), or with whom you have a
servicing contract. If you are not sure who to contact, and have both purchased and are
using the equipment in the U.S.A., please refer to the “SUPPORT” page on Canon U.S.A.’s
Web site (http://www.usa.canon.com).