Canon EOS 60DA - Manual (Page 120)

119
1
2
3
4
5
Introduction
Contents at
a Glance
Basic
Operation
Advanced
Operation
Advanced
Image Editing
and Printing
Editing
JPEG/TIFF
Images
Index
Processing
Large Numbers
of Images
Reference
Saving Editing Results
All the contents (recipe) adjusted with the tool palette (p.103 to p.110)
as well as the trimmed range (p.111) and dust-erasure (p.114 to p.118)
information can be saved to a JPEG or TIFF image, or to a separate
JPEG or TIFF image.
Select the [File] menu  desired item.
 Your adjustments are saved to the image.
Saving Editing Content to an Image
If a JPEG or TIFF image is adjusted with the tool palette (p.103 to p.110)
and then saved in the same way as a RAW image as described below,
the image can be saved as a separate image with the adjustments
(recipe) applied to it.
Furthermore, if a trimmed image
(p.111) or dust-erased image (p.114 to
p.118) is also saved in the same way, it actually becomes a trimmed or
dust-erased image.
 Saving as a JPEG or TIFF Image (p.42)
 Batch save as JPEG or TIFF images (batch processing) (p.99)
By saving as a separate JPEG or TIFF image as explained above, the
adjustments made with the tool palette are applied, and some image
deterioration that accompanies editing/saving occurs as when editing
with ordinary image editing software.
Applying Editing Contents to Another Image
You can copy the adjustment contents (recipe) of JPEG and TIFF
images that have been adjusted with the tool palette and apply them to
another image with the procedures below, in the same way as with RAW
images.
 Applying adjustment contents to another image (p.41)
 Utilizing adjustment contents (recipe) (p.96)
Printing
Edited JPEG and TIFF images can be printed with the procedures
below as with RAW images.
 Printing (p.43)
 Printing with shooting information (p.85)
 Printing a thumbnail list (contact sheet printing) (p.86)
 Printing RAW images on a high-end Canon printer (p.87)
Saving as a Separate Image
COP
Y