Cop y – Canon Wireless File Transmitter WFT-E4 II A User Manual

Page 106

Advertising
background image

106

Responding to Error Messages

Are any obstacles blocking the line of sight between the transmitter and the
antenna of the wireless LAN terminal?

X

Move the antenna to a position clearly visible from the point of view of the transmitter.
(p.110)

What to check on the transmitter

On the transmitter, does the SSID setting match that of the wireless LAN terminal?

X

Check the SSID on the wireless LAN terminal, and configure the same SSID on the
transmitter. (p.25)

What to check on the wireless LAN terminal

Is the wireless LAN terminal on?

X

Turn on the wireless LAN terminal.

When you are using WFT-E4 IID with wireless LAN terminals supporting IEEE
802.11a, are the terminal settings locked on IEEE 802.11a?

X

Configure the wireless LAN terminal to allow access via IEEE 802.11b and g.

If you are filtering by MAC address, did you register the transmitter’s MAC address
on the wireless LAN terminal?

X

Register the transmitter’s MAC address (p.70) on the wireless LAN terminal.

What to check on the transmitter

Is the transmitter configured for communication in infrastructure mode?

X

Configure the transmitter for communication in ad hoc mode.

What to check on the wireless LAN terminal

Is there a nearby wireless LAN terminal for ad hoc communication?

X

Prepare a wireless LAN terminal for ad hoc communication near the transmitter.

61: Same SSID wireless LAN terminal not found

62: No response from wireless LAN terminal

COP

Y

Advertising