Cop y – Canon Wireless File Transmitter WFT-E4 II A User Manual

Page 92

Advertising
background image

92

Connecting GPS Devices via Bluetooth

5

Select [OK].

After the Bluetooth unit is attached to the
transmitter, the transmitter’s <USB> lamp blinks in
green and a message is displayed indicating that a
connection has been established.

When the confirmation message is displayed, select [OK].

X

At this point, the menu option [Disconnect]
becomes available. Select this option before
detaching the GPS device.

6

Establish a wireless connection between
the GPS device and Bluetooth unit.

Turn on the GPS device and activate Bluetooth® on it.

Select [Bluetooth device connection].

X

Nearby Bluetooth® devices in use are listed. (Only
GPS devices can be connected.)

7

Select the GPS device.

Press <0> to display the connection status of
Bluetooth® devices.

Pressing <0> when the status is [Not conn.] will
list nearby Bluetooth® devices in use.

Turn the <5> dial to select [GPS] , and then
press <0>.

Select [OK] and press <0>.

If a Bluetooth® password has been set on the
GPS device, a password input screen is displayed.
Enter the password.

X

The transmitter now starts to establish a
connection with the GPS device.

It may take a few minutes to establish a
connection with the GPS device.
Camera operations such as shooting, menu
display, or image playback are not possible
until the connection is established.

COP

Y

Advertising