Orientation, Image orientation priority, Auto orientation – Canon imageCLASS MF7470 User Manual
Page 105: Orientation -34, Image orientation priority -34, Auto orientation -34
1
2
3
4
5
6
7
8
9
10
11
3-34
Previous
Back
Next
TOP
Before Using the
Machine
Original and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network (imageCLASS
MF7480/MF7470 Only)
Remote UI (imageCLASS
MF7480/MF7470 Only)
System Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Orientation
Image Orientation Priority
If Image Orientation Priority is set to [On], the machine always
copies an image in the same orientation as the original image. This
is because the image on originals may be copied upside down,
depending on the copy mode set.
If you do not want to copy the original image upside down, such as
when copying on letterhead paper, or paper with a logo (such as a
cover sheet), set the Image Orientation Priority to [On].
1.
Press (COPY).
2.
Press (Additional Functions).
3.
Press [Copy Settings] → [Image Orientation
Priority].
The Image Orientation Priority screen appears.
4.
Select [On] or [Off] , then press [OK].
5.
Press [Done] repeatedly until the Copy Basic
Features screen appears.
Auto Orientation
If Auto Orientation is set to [On], the machine uses information,
such as the size of the original and the zoom ratio, to determine the
most suitable orientation for the specified paper size and then
automatically rotates the image, if necessary.
1.
Press (COPY).
2.
Press (Additional Functions).
■
■
3.
Press [Copy Settings] → [Auto Orientation].
The Auto Orientation screen appears.
If LTR or STMT originals are enlarged onto 11" x 17" or LGL copy
paper, Auto Orientation is not performed even if you select [On].
Only the images of standard size originals, up to LTR paper, can
be rotated when the copy ratio is set to 100%.
If Automatic Paper Selection is set and the most suitable paper
size is not available, the paper source that is loaded with paper of
the same size, even if the orientation is different, is displayed as
the optimal paper to use.
4.
Select [On] or [Off] , then press [OK].
5.
Press [Done] repeatedly until the Copy Basic
Features screen appears.
–
–
–